Press "Enter" to skip to content

How to remove water from a phone or computer’s charging port

If there is water in your iPhone’s charging port, you will get this message. “Apple”

  • Waiting until it has dried out is the best way to get water out of a charging port.
  • The device, with the charging port pointing down, can also be tapped on your hand to see if that helps to drain the water.
  • Avoid inserting strange materials into the charging port, such as cotton swabs or paper towels, as they may force the water in further.

In fact, the majority of high-end cellphones are water resistant to some extent, and the most recent iPhone models can even withstand submersion up to six metres deep. However, the interior parts are still susceptible to moisture and will break down if they become too wet.
Get the water out of the charging port on your phone, laptop, gaming console, or other device as soon as possible.


The most effective technique to remove water from your charging port


The best technique to remove water from a charging port is to leave it alone and let it to dry, even though it may seem too easy to be true.

Leave the gadget in a room with active air circulation and a good ventilation system. Keep the charging port exposed, and if at all feasible, leave it oriented downward so that gravity can speed up the process.

Make sure air is circulating through your space.
Check the port after giving your gadget at least 30 minutes to dry. Keep waiting if you still see wetness inside or if the device continues to report a “liquid detected” problem.

READ  The Best Five Delta Computer Systems


Try lightly tapping your device against your palm with the charging port facing down if it is small enough to be held in one hand. This can assist in removing extra water.

What not to do while trying to remove water from a charging port


When drying water, there are some traditional wisdoms that you shouldn’t adhere to.
First, avoid placing foreign objects—such as a cotton swab or paper towel—into the charging port. If you’re not careful, you can wind up damaging or moving the inside components as well as pushing the moisture deeper into your gadget. Even when dry, it won’t function at that point.
Some instructions advise using a hairdryer to saturate the appliance with hot, moving air. But doing so could cause your device to overheat and perhaps damage the metal in the charging port.

Additionally, despite the advice of numerous websites, never leave your phone in a bowl of dry rice. Small pieces of rice or starch can clog the charging port and cause harm, and doing this doesn’t dry it out any faster than using moving air.


Rice grains can lodge themselves inside your phone, corroding the hardware. “Pfeiffer/Shutterstock”


Simply wait for your device to dry. When the water is gone and it is operating normally once more, you’ll be grateful.

Be First to Comment

Leave a Reply

Your email address will not be published.